Modesto CA Industrial buildings have tons of piping that appear nothing more than just the ordinary plumbing pipes at home. Because residential pipes are hidden, most people do not know the difference between process piping and plumbing. We are the leading Modesto process piping contractor for all your needs.
The main difference is their function, with the pipes at home mainly used to transport water in and out of a building. Process piping uses similar-looking pipes but they are used for other materials. It highly depends on what the business does, but they can transport chemicals, raw ingredients, oil, and many more.
The following Modesto CA industries rely on process systems services in their facilities:
- Oil Refineries
- Food and Beverage
- Paper Mills
- Chemical Processing Companies
- Power Plants
- Wastewater Treatment Plants
- COGEN Plants
- Breweries
- Aerospace Manufacturing Facilities
What Is Process Piping?
Modesto CA industries need to move around different kinds of gases and fluids. Beyond the tubing, process systems also require flow control instruments, manual control valves, temperature control instruments, heat exchangers, pressure control equipment, pipe supports, flanges, air piping, plus the necessary bolts, nuts, and gaskets.
What Services Does A Modesto CA Process Piping Contractor Offer?
The services of a process piping contractor is required from the very beginning, planning the design of a facility, so that the needs of the client are thoroughly accessed and incorporated in the design. No two designs are the same, especially when the materials to be transported are different. Part of the service is to incorporate whether these gases or liquids are to be mixed, filtered, separated, or need to be pressurized.
After the design stage, the CA service company will proceed with the implementation, starting with the installation of the pipes and instruments. Only qualified welders and pipefitters with the know-how and expertise will execute the design, using the right materials so the piping will be durable and long-lasting.
Any necessary control valves and support equipment like cooling towers is also included in their services. Before the actual use of the piping system, testing service is done to ensure that all systems are good to go. Other services of the contractor include heat tracing (for steam or electrical uses), insulation, and labeling.
All of the services of a process piping contractor needs to meet the regulations and standards set by responsible groups like OSHA (Occupational Safety and Health Administration) and the ASCME (American Society of Civil and Mechanical Engineers). Compared to simple plumbing systems, there are stricter safety standards that need to be met and upheld. Plus, specific piping systems need a permit, as well as are subject to inspection and approval processes. Meeting them is included in the list of services of your contractor.
Lastly, process piping contractors in CA is offer maintenance and repair services, should any part of the system be malfunctioning or even need to be updated. In certain industries, there are safety concerns if the process piping system is compromised, corroded or in cases of pipe bursting. This is why the service and installation of sensors, control valves, and other equipment are necessary to monitor the systems.
What Materials Are Used For Piping?
Our expert contractors in Modesto CA know the best materials for whatever gas or liquid that will be eventually transported in the pipes. Some codes guide the selection and installation process so that the pipes will be safe from corrosion and erosion. They also need to withstand extreme temperature conditions (both inside and outside the pipe) and high pressure.
PVC Pipes
PVC stands for polyvinyl chloride, which is used for many purposes like for process piping. It is cheap and durable, but it has its limits. PVC usually degrades at 100 degrees, especially under light exposure. Plus, it releases hydrogen chloride.
High-Density Polyethylene Pipes
This material is impact resistant and has better tensile strength. Plus, it is resistant to extreme climate conditions, corrosion, and harsh chemicals. This is due to its high impermeability and strong molecular bond. It is the best choice for high-pressure pipelines, which is why it is widely-used for tons of different purposes.
Metal Pipes
Plastic pipes might not be the best choice for every system, and there are several kinds of metal pipes that can be used instead. For example, copper is light but highly resistant to corrosion and installation is easy. The downside, however, is that is more expensive. Steel is another widely used material that can handle high temperatures and pressure, with certain kinds of steel resistant to corrosion. Unfortunately, they are heavier than copper.
Get The Right Contractor
The handling and transport of specific gases and liquids require the expertise and service of our professional contractors in CA who can design and implement process piping systems. Our main service is to plan for every client (with rights reserved on the design), incorporating their needs and making the right decisions on the best materials and equipment. Not only will it ensure the daily efficiency of work, but their services will ensure the safety of people who have to work with these chemicals and gases.
