{"id":1213,"date":"2018-12-06T05:20:27","date_gmt":"2018-12-06T05:20:27","guid":{"rendered":"http:\/\/www.extremeepoxycoatings.com\/?page_id=1213"},"modified":"2018-12-06T05:21:48","modified_gmt":"2018-12-06T05:21:48","slug":"california-industrial-coatings","status":"publish","type":"page","link":"https:\/\/www.extremeepoxycoatings.com\/california-industrial-coatings\/","title":{"rendered":"California Industrial Coatings"},"content":{"rendered":"
Industrial establishments have to think big about their infrastructure as a means to ensure their productivity and safeguard the bottom line. The application of industrial coatings is one of the best ways to ensure optimum performance by the organization. This is very important for all industrial and commercial establishments, but more so in the state of California where certain laws may have an impact on the way industrial coatings<\/em> are applied.<\/p>\n Industrial coatings are solutions that are generally applied to concrete and metal structures to help protect such structures against environmental, mechanical, and even chemical insults. Different providers of industrial coatings in California have different solutions to offer. However, regardless of the type of industrial coatings<\/a> offered by these California companies, this one is a must: these products should adhere to the state\u2019s law on VOCs<\/a> or volatile organic compounds.<\/p>\n<\/div> When it comes to industrial coatings<\/strong> as well as floor coatings<\/a>, VOCs are a mainstay and can be found in various forms. While the Environmental Protection Agency provides the guidelines<\/a> on the maximum allowable VOCs per unit of measure, it is the California Air Resources Board that is primarily responsible for the setting of more stringent guidelines that everyone has to adhere to. This is especially true for those in Southern California where air pollution and smog are substantially more severe than the other parts of the state.<\/p>\n For South California, the CARB places the maximum amount of VOCs in industrial coatings at 10%. For the rest of the state, the limit is a bit higher at 25%. It is critical to understand, from the point of view of industrial establishments, that the type of industrial coatings they apply should adhere to the requirements of the law.<\/p>\n Let us now look at the two fundamental types of coatings<\/em> used in industrial establishments:<\/p>\n<\/div> These are industrial coatings that make use of carbon materials; hence, the name. These typically contain modified or refined petroleum products, a number of solvents or VOCs, fillers, additives, and even pigments. In California, organic industrial coatings<\/strong> can come in the following forms:<\/p>\nIndustrial Coatings and the California Law on VOCs<\/h2>\n
Organic Industrial Coatings in California<\/h2>\n
Epoxy Coatings<\/h3>\n