The best thing about floor and wall remodeling is that you will never run out of options to choose from in terms of materials, design and concepts.

However, aside from the costs there are many other things to consider before finalizing your floor and wall remodeling plans. Some of these are the following:

Check for any structural implications

Remodeling the floors and walls can have structural implications. Don’t be in a hurry to remove old walls and flooring without first checking its structural implications. Sometimes, people immediately remove their old walls and floor only to find plenty of electrical wires. Others realize too late that at the corner or on the edge of the wall or floor is a long line of plumbing lines. This is why it is important that a thorough assessment be done prior to removing any part of the wall or floor.

Find out if the wall is load-bearing

This step is better done by an engineer who has enough knowledge in determining whether a wall is load-bearing or not. This may entail that you have to shell out some amount of money to pay for the services of an engineer who will assess the structure of your home or business establishment. A site or structural inspection conducted by a licensed engineer may be costly but it will prove to be worth it. Removing load-bearing walls may require you to install a new beam where you need to transfer the load above.

Address damages with effective solutions

The floor is a crucial part of a commercial or residential establishment. Needless to say, it has to be sturdy since it receives the most beating every day. However, no matter how durable or how expensive your floor tiles could be, these are not enough to make your floors immune from any leaks, spills and traffic. The more traffic it receives, the more likely it becomes cracked and scratched while also having holes. Unfortunately, these signs of damage would also make the floors more likely to cause accidents. But these damages on the floor are easily addressed with epoxy flooring technologies. Extreme Industrial Coatings provide the best and impeccable resinous solutions for commercial and residential floorings.

Keep it safe from disease-causing microorganisms

Walls may not receive as much beating as the floors do. But if left poorly maintained for a long period of time, the walls may also harbor airborne bacteria. And, in this pandemic era that we are in right now this could also spell disaster. This is why remodeling the walls should not only entail covering the old paint with a new one. The walls also need to possess antimicrobial properties to ensure safety from disease-causing airborne microorganisms. If you are particularly concerned with health and sanitation, you should consider applying wall epoxy solutions. These will make you have better control of microorganisms within your walls. These wall and floor epoxy solutions can also be provided by Extreme Epoxy Coating company.

Choose color-retention products

Spare yourself the frustration of spending a lot on paint and choosing which color is best only to find that it fades after a couple of months. Consider using color-retention products that will make your walls look brand-new for a longer period of time. Choosing color-retention products will also help you save money in the long run since you do not need to repaint your walls more often. Extreme Epoxy Coatings also provide the best color-retention products.

Planning your own floor and wall remodeling project can be daunting. It is best to do it with the help of experts from Extreme Epoxy Coating company to make the entire process cost-effective and successful.

Floor and wall cracks signal a great deal of panic for home and building owners. However, here’s some good news that can ease the chaos. Floor cracks are usually normal depending on its size and severity. But, basement floor cracks are another story that will call for immediate attention and repair.

You may even wonder if concrete can actually crack given its strength and durability. It is also a widely used building material. However, geology has something to do with floor and concrete wall cracks. Take for example California. Since this state is geologically-active, it is not a wonder why floors and concrete walls crack.

On the other hand, cracks on the walls can be visually examined. This will allow you to check the damage. Furthermore, this can also give you the idea on what options to take to repair cracks on the walls as well.

Here are 4 types of cracks on floors and walls. It is always best to know the different types of cracks so you can better understand why this is happening to your building structure.

1: Cracks with heaving

When a floor or wall cracks swell upward, this is cause for serious concern. Heaving may be caused the same way as cracks. However, cracks on the floors with heaves can mean that the soil underneath is expanding. If so, then your floors will be lifted off its base and can cause great damage to your structure. This case often happens in areas having clay soil. The best you can do is call for professional help before further damage and danger occurs.

2: Cracks that sink

Floors and wall cracks that are slowly becoming uneven must be repaired at once. This happens when a part of the less supported concrete sink. After that, surfaces can become uneven which can result in different hazards. Giving professionals a call for repairs is a wise decision. They are likely to use polyurethane mixture to lift, expand and make the concrete slab even again.

3: Hairline cracks on floors and walls

Even as this leaves an unpleasant sight, hairline cracks on floors and walls do not really need immediate attention. Hairline cracks or otherwise known as small cracks, results after concrete dries. These cracks can show up within a year or depending on how quickly the slab dries. The area’s temperature is also another thing to consider for the occurrence of hairline cracks.

4: 1/8-inch or wider cracks on floors and walls

These types of cracks are also similar to hairline cracks. However, this does not mean there is a serious problem in the foundation of a structure. Nevertheless, even small cracks on your floors and walls can allow water and moisture to enter. Thus, this will only make it wider and larger resulting in even more damage. That is why sealing these cracks must be done to keep water and moisture from seeping through concrete. A proper Moisture Control Systems can help to prevent the serious damages.

Concrete floor or wall cracks are inevitable and somewhat normal. This is because the ground beneath continuously shakes. Aside from this, too much water added to the concrete mixture during a building’s construction, can also be a factor. Another reason is shortened drying time for concrete floors or walls. This can really cause cracks to occur that can further lead to leaking and weakening of an entire building structure.

But don’t worry, this does not mean nothing can be done to solve this problem! After you have visually identified what’s going on with your floors and walls, you can head on to your next step of contacting for professional repair help. Various home and industrial solutions are possible from Extreme Epoxy Coatings. Your floor and wall cracks can be repaired without stains or compromising your structure.

California has an ambitious goal of building only new houses that are Zero Net Energy (ZNE), meaning they do not use any external electricity sources. Instead, the house itself generates it through renewable sources like solar.

Since 2012, there have been 700% more ZNE buildings and houses nationwide, thanks in part to the builders who are specializing in such construction and making it easy for environmentally-conscious owners to do their bit in reducing emissions. A striking trend is also residential sites that are increasingly adopting this trend. In the past, it would have meant a significant investment on the part of the homeowner to install solar panels, but fortunately, times have changed.

The Right Wall System & Making A House Zero Net Energy

Beyond just transitioning to 100% renewable energy for your home, there are other ways to make sure your home is as green as it can be. One of them is to construct the house’s frame using recycled steel, which is stable, long-lasting, and friendly to the environment.

Most of these houses have their own solar panels, but one of the most important advances is the ability to store the energy they capture. Thanks to large batteries, like the ones produced by Tesla, homeowners can save the energy they do not need for later use or even to be sold back to the electric company. This makes it truly possible for you to live without any emissions at all. In fact, these new houses do not even have a natural gas line leading to them.

The Role Of The Right Wall Systems In Building A ZNE Home

An important part of a ZNE house is the construction of the house itself that allows the owner to conserve energy (and thus, reducing use). Because California has warm summers and in some areas, cooler winters, homeowners need to either cool or heat the place.

Normal construction practices, in reality, are not very energy-efficient because of the amount of energy they tend to lose. Depending on the age of the building and how it was constructed, houses lose the cool or warm air generated by the HVAC system. On average, the amount lost is about 40%.

A ZNE house has a much lower amount than this. Meaning homeowners see up to 90% reduction in their HVAC expenses, simply because they do not need to cool or heat more to compensate for what gets lost.

The secret to this is using spray polyurethane foam insulation to especially protect the parts of the wall where air leakage occurs. In doing so, the walls become tightly sealed and the heated or cooled air stays inside. The same spray foam is used below the roof deck and all wall and joint connections.

Another advantage of investing in an airtight home is the better air quality due to pollution and allergens being kept outside. Plus, there is less outside noise heard inside the house, and the rooms themselves become more soundproof so that you do not hear the loud music being played in another room.

Most of the time, the role of the wall systems in achieving an energy-efficient house is overlooked. Interestingly, adopting the right products like a spray polyurethane foam insulation can truly make a huge dent in your heating and cooling costs.

Contact Extreme Epoxy Coatings today for a free quote for all your wall system needs in California!

Establishments such as factories, storage facilities, and shopping malls may require walls that offer increased protection from mechanical and chemical damage. This is why industrial wall systems are commonly used in both commercial and manufacturing establishments. In fact, this type of walling has found its way into residential establishments such as hotels, condominiums, and even homes as well in recent years.

What are the Benefits of Industrial Wall Panels?

One of the most obvious benefits of having an industrial wall system is its increased durability compared to regular walls. Industrial wall systems are highly resistant to common damage such as scratches, stains, and dents. These walls are also reinforced using a mixture of resin, fiberglass, and other materials as well as an epoxy coating that gives it its shiny finish.

Industrial wall systems also feature a special coating that makes them resistant to moisture and bacteria. Protection against moisture caused by changing temperatures and pressure prevents water damage. On the other hand, protection against bacteria makes industrial wall systems one of the most sanitary options available in today’s market. They even come with antimicrobial additives to make them safer.

There Are Limitless Design Choices

Another reason that a lot of people are attracted to industrial wall panels is that they can easily accommodate different fixtures and additions. This could be as small as shelving for cupboards or as big as truck doors for a loading bay. These walls also come with different aesthetic options such as various colors, textures, and in some cases, even patterns. Industrial wall systems could be made to look like wooden planks, stone tiles, or even old bricks.

The basically unlimited design choices for these wall systems are perfect for commercial and residential establishments – those that are built to be as attractive as possible for prospective visitors and investors. Industrial wall systems also have rounded corners, which make them less likely to cause injuries, especially to kids that like to run around.

Industrial Wall Panels Are Cheaper than Expected

Now, you may start thinking that all this comes at a price. While it is true that industrial wall panels may seem more expensive at the start, they may save you a fortune in the long run. You won’t have to replace them as often or spend as much on maintenance. In fact, you only need to clean them once every couple of weeks to keep them in the best condition.

Industrial wall systems are also fairly easy to install despite their added functionality. You again save more money by not having to pay inflated construction costs and because your business operations will resume sooner than expected. Industrial wall systems can also be installed in multi-story buildings, which is an attractive prospect for those with large businesses. However, contrary to what some people might think, the use of industrial wall systems is not only limited to large-scale projects. Smaller buildings can also use them.

So if you’re looking to upgrade the walls your residence or your business establishment, or if you simply want to give them a new look, you may want to consider industrial wall systems by Extreme Epoxy Coatings. We service commercial and residential clients across California from Northern California all the way to San Diego.

Sacramento—the bustling capital of California with titles like the sixth-largest city in the expansive state, the ninth-largest U.S. capital, and the fastest-growing major city in California, it only makes sense that its origins are rooted in the era of the Gold Rush—Sacramento refuses to slow down.

Yes, the booming city is indomitable, but its infrastructure is not infallible, and that’s where Extreme Industrial Coatings steps in, to offer creative solutions to impending property problems such as epoxy flooring, epoxy coatings, trench drainage systems, wall systems, injections, and foam insulation, concrete flooring, and urethane cement.  Extreme Industrial Coatings Sacramento has been faithfully serving businesses, industries, and residential clients for years because our services meet the demands of America’s most rapidly growing city.

Our Foam Insulation Maximizes Your Building’s Energy Efficiency

Business can keep costs down with our spray foam insulation service.  Insulating buildings isn’t just for colder climates.  California’s intense heat can infiltrate buildings, and the attempt to cool the interior can drive up energy costs.  Foam insulation forms an airtight, impenetrable barrier, far superior to ordinary insulation because of its spray-on application that adheres to the curves and crevices to any surface.

Cracks, chips, dents, and other deformities are repaired easily with a layer of spray foam insulation and its polyurea topcoat for an added level of durability.  You’ll notice immediately the effectiveness of its temperature regulations and dramatic reduction of your energy bills.

At Extreme Industrial Coatings Sacramento, we treat buildings from Freeport to North Natomas and everything in between.  We’re trained, certified experts in spray foam insulation technology and our professional experience in the service allows us to install the highest-grade products with expertise, with minimal disruptions to your schedule.  We have provided foam insulation services near Tower Bridge, scenic Paradise Beach, and even south of town by Cosumnes River College.

Polyurea Coatings Experts for Quick Application and Long-Lasting Durability

We’re not only certified experts in epoxy coatings, but also in polyurea coatings, where the marriage between a resin and an isocyanate component gives way to one of the industry’s most durable surface protectant.  The rise of polyurea coatings’ popularity can be attributed to its corrosion and water resistance, and protection against abrasion, abuse, and chemicals.

Polyurea coatings are versatile and can be applied to roofs, the interior, and exterior of pipes, tanks and beams, infrastructures such as bridges, decks, belts, and platforms.  These coatings are ideal for high-impact environments exposed to environmental and hazardous factors, to which normal surfaces cannot withstand.

This chemistry demands the expert hands and practiced skills of professionals, which is why our team, Extreme Industrial Coatings Sacramento, is the most trusted in the business.  We solely utilize the highest quality of products and application technology, but above all else, our efficiency and specialized knowledge allow for our clients to receive the best service in Sacramento—from Parkway-South to Del Paso Heights!

Our Epoxy Crack Injections Will Repair Damages in No Time

Whether you’re near California State University, Sacramento, or up north by Discovery Park, there’s no wall or flooring that’s completely saved from accumulating cracks.  Concrete is especially prone to these frequent issues, and with the occasional colliding of the tectonic plates, Sacramento’s structures get shaken up quite a bit.

Fortunately, there’s an easier, more cost-effective solution than a total renovation, and it’s epoxy crack injections.  Drawing on epoxy’s inherent strength and adhesive surface protection, your structures can not only be saved but also bonded with industrial adherent that will avoid you being forced to completely start anew.

Our epoxy crack injections don’t require drilling or other invasive procedures that hinder your structure or your workplace’s day-to-day operations.  Our experienced technicians begin with crack injection ports, a technique that allows the process to be as efficient and timely as possible.  We seal the surface with high-grade, industrial strength epoxy adhesive, and once cured, we perform a thorough analysis to confirm all cracks and damages have been addressed.

At Extreme Industrial Coatings, our work will ensure your building’s structural integrity, promoting a safe, stable, and secure environment.

Redefining the Term General Contractor

Extreme Industrial Coatings understands the bad rap contractors get in the industry, which is why we strive to exceed our clients’ expectations in our services, responsiveness, and experience.  Sure, epoxy is the name of what we do best, but as an all-purpose company, our expertise knows no boundaries.  We’ve worked on hundreds of unique projects in the Sacramento area, in Gardenland, near the Capitol Casino, and up by Hansen Ranch Park, all with vastly different environments and structures presenting their own set of needs.

Because of our experienced general contractors hailing from an array of backgrounds, training, and education, Extreme Industrial Coatings can bring together a team with the ability to tackle any type of project, from construction, labor, mechanics, and everything in between.

We source all of our materials legally, documenting all services rendered in accordance with California law, and only purchasing and utilizing the highest quality produced.  We understand that our clients want the most durable construction materials available, and at Extreme Industrial Coatings Sacramento, we can assure our clients won’t be sacrificing high-quality needs for cost-effectiveness.

Our Sloped Flooring Installation, Tailored to Your Space

Achieving the ideal, most aesthetically natural sloped flooring is not an easy task, but here at Extreme Industrial Coatings, we’re expertly versed in this endeavor. Spaces that require a sloped floor, whether it’s an industrial warehouse or your home’s upstairs bathroom, are all unique, varying in their exact needs.

The execution of a sloping floor involves numerous, intricate steps and insists on a keen eye for detail and perfectionism.  The project will involve an assessment, measurements, the removal of the existing floor, and the final installation of the drain.

Our sloped flooring team has designed countless of drainage systems that integrate neatly and seamlessly into the surrounding environment.  Sloped flooring demands professionals who can design, calculate, and implement its complex system, and our years of experience in doing allows us to be the leading sloped flooring experts in Sacramento.

An Extreme Difference: Flooring and Wall Remodeling

Business and commercial establishments are required to meet regulations that create a workplace environment that prioritizes safety.  These environments are not just dedicated spaces for employees, but also congregating areas for the public.  Remodeling facilities to address these issues with the guidance, expertise, and wall and flooring services that Extreme Industrial Coatings offers is the most cost-effective and efficient method in Sacramento.

A poorly designed workspace can lead to slippery floors, damages to the floors and walls in terms of cracks and unsafe hazards, and an unhygienic environment.  Facilities must be able to withstand the daily abuse of a bustling warehouse, holding its own against wet processing that could involve chemicals and other cautionary substances, foot traffic, and bear the weight of heavy machinery and equipment.

Only at Extreme Industrial Coatings will you receive extensive project counseling from early planning stages to the dedicated installation, as we believe that a remodeling project should meet the client’s goals every step of the process.  Partner with us to assist you in remodeling your facility today, not just for safety’s sake, but to achieve a presentable, clean, and functional space for your business.

Effective Moisture Control Systems for Even the Wettest Environments

Property owners know that moisture and structures do not get along, and for that reason, Extreme Industrial Coatings has perfected the art of the moisture control system, employing the best of our products and talents to put a full stop on moisture damage.  Once moisture lingers and seeps in through structures, it can wreak havoc on foundations and their integrity.  When moisture sets in, the building’s functionality fails, from the walls to the floors, problems begin to sprout, and that includes mold and mildew.

Stopping the damage before moisture incites damage is critical and every building should have a moisture control system or otherwise property owners could be faced with hundreds of dollars of repairs. We apply our epoxy products to surfaces, enacting an impermeable barrier that deflects moisture, preventing it from penetrating the epoxy coating.  Even wet processing facilities and wash down areas can be protected from potential water damage with our epoxy moisture control system.

Exceptional MMA Flooring and Coatings

Don’t have the time to wait for your surfaces to harden after a fresh coat?  No problem.  Extreme Industrial Coatings has still got you covered—literally, with our MMA coating’s super fast-curing abilities.  Our MMA floorings don’t neglect durability for the sake of efficiency, either.  Methyl methacrylate is known for its extreme durability and is characteristically versatile, even utilized for environments of sub-zero conditions.

This surface coating is comprised of reactive resins, it’s the magic ingredient that is responsible for such an astonishingly fast curing period.  Additionally, MMA coatings provide an anti-slip surface, making it ideal for pedestrian walkways and other high trafficked areas.  Like our other coating technologies, MMA coatings can repair cracks and holes by creating a fortified bond to the damaged surface while establishing a seamless topcoat.

Extreme Industrial Coatings sets the industry standard in coating solutions, and MMA coatings allow our skilled applicators to complete MMA installation nearly as quickly as it would take for the coating to cure.  For your MMA flooring needs, contact us today, we’re just blocks away from Sacramento City College.

Leading food establishments in California turn to seamless wall systems to help them keep the highest possible level of sanitation in their facilities. This helps ensure that all food and food-related products and processes are kept safe. Restaurants and food processing establishments have trusted Extreme Epoxy Coatings through the years to deliver to them high-quality products and services addressing their commercial kitchen wall covering requirements. And if you’re also in the food business with a commercial-grade kitchen, then here are

4 Reasons Why You Need Seamless Wall Systems:

1. Safe materials

Because the kitchen deals with food that people consume, only USDA approved paint can be used on the different surfaces in a commercial kitchen. This is, of course, in addition to FDA approved paint for food contact. This is one of the most important reasons why large establishments trust Extreme since the applications used in complying with commercial kitchen wall covering requirements are all compliant with safety guidelines issued by the appropriate regulatory agencies of the government. This way you can be sure that every food product that goes out of your kitchen will be safe to consume.

2. Excellent antimicrobial properties 

In line with the safety of the epoxy paint for drywall that is used by Extreme, antimicrobial agents are typically added to the various products that comprise the seamless wall system. This further extends the safety of the FDA food grade paint. What this simply means is that harmful microorganisms that can come in contact with commercial kitchen walls surfaces are immediately killed or inactivated so that these will not contaminate any food material that is present in the kitchen work area. Adding to the antimicrobial properties of seamless wall systems is the absence of spaces or joints where microorganisms can hide. Overall this translates to safer food products which mean safer human consumption and happier, more satisfied customers.

3. Superb impact-resistant quality 

The beauty of the seamless wall systems of Extreme Epoxy Coatings is that these are built to withstand a variety of impact forces that may come from the various equipment, tools, gadgets, and machinery in the kitchen. You can always feel confident that your commercial kitchen wall paint will not immediately peel off with just a single scrape from a butter knife or any other tool or gadget in the kitchen. This can also translate to improved safety in the kitchen as any loss of integrity in the kitchen surfaces no matter how small can still be a potential source of safety concern for your employees.

4. Enhanced aesthetics

Establishments across Northern and Central California love the way seamless wall systems work to improve the overall aesthetics of their respective kitchens. It is basically like giving it a new life. The FRP wall panels of Extreme Epoxy Coatings can be fabricated specifically to meet your aesthetic needs. This way you can create a more stunning kitchen or food processing area for your business.

Seamless wall systems not only help you ensure you have a safe product coming out of your kitchen. You’re ensuring the safety of your employees, too.

Call us today for a free quote for your business!