Moisture Control Systems Archives |

How do you Control Moisture in a Building?

Jarrett Holmes — Wed, 04 Jan 2023 04:35:10 +0000

Moisture out of control in buildings poses structural risks on the property and health problems for the people who reside in it. But how exactly does it affect your living or working situation? Here’s what you should know:

Drawbacks of Moisture in Buildings

Moisture actually seeps into the cracks and jeopardizes the integrity of the building, causing accelerated weakness along the load-supporting walls. Chemical reactions can occur with the building materials, leading to structural defects with the fasteners, metal roofing, wiring, flooring, adhesives, and conditioning coils. These speed up the wear and tear of the building, significantly increasing maintenance costs while reducing longevity.

For wooden materials, moisture can cost the wood to warp, rot, or swell. Paint can quickly peel off due to the moisture and any thermal insulation of the building is drastically reduced, leading to higher energy costs.

Moisture also promotes mold growth, causing bacteria and mildew to colonize the HVAC system. As the spores become airborne, upper respiratory problems can occur such as coughing, wheezing, shortness of breath, and even the development of asthma.

Sources of Moisture in a Building

So how exactly does moisture get into buildings? Typical reasons include:

Water leakage in the building’s pipes or envelope. The area of concern is usually located on the walls or portions of the building where stains start to appear.
Suspended timber floors can also be a source of moisture due to the wet ground underneath. This can happen if there’s heavy rain or moderate flooding.
Flooding and extreme weather can also force moisture into buildings.
Moisture that’s retained in the building materials could further release water into the environment.

Tips To Control Moisture in a Building

So what exactly can be done about moisture? Here’s what we know:

1: Reduce Humidity

Dehumidifiers are a good place to start when it comes to removing moisture from a specific room. Dehumidifiers can be inexpensive and compact; capable of taking out the water right off the air in small spaces. Note that dehumidifiers need to work for most of the day so it’s best to get a unit that’s Energy Certified to minimize power costs.

2: Seal Sources of Moisture

Dripping faucets or cracked pipes can be the source of continuous moisture in the environment. You want to seal these off as quickly as possible with the help of a plumber or any handy professional. Water penetrating a building becomes instantly obvious when mold or stains start to appear on the wall. When this happens, make sure to trace the source, fix the pipes, and then thoroughly clean the surface.

3: Improve Air Flow

Opening windows and doors can help promote airflow throughout the room. As air moves through the space, any water in the space evaporates, thereby drying out the room. You’ll notice how basements usually suffer from mold and mildew; this is because these spaces rarely have proper airflow. In some cases, simply leaving the door and windows open can help remove the extra moisture from the area.

4: Insulate the Building

Note that moisture doesn’t always come from the building’s pipes. There are instances when it comes from outside – specifically when wet weather seeps through the walls and into buildings. To fix this problem, the property’s insulation needs to be reinforced to prevent water transfer. This also helps with power conservation as proper insulation helps keep warm air inside the home.

5: Moisture Control Systems

There are companies that provide comprehensive moisture control systems in buildings. Extreme Epoxy Coatings provides this service to property owners. You can simply have scheduled and regular visits from maintenance experts who know exactly what they’re doing. Using Extreme Epoxy Coatings, you get the best that the industry has to offer while keeping costs and operational disturbances minimal. There are several options for moisture control systems and owners can pick which one fits their needs the best.

Final Word

Of course, those are just some of the ways property owners can help reduce humidity or moisture in their properties. Bear in mind that a completely dry room is just as bad as a moisture-filled one. Ideally, humidity levels in a room should be anywhere between 30 to 50%. Too little or too much can both pose problems for the people inside.

EMAIL US

CALL US

The post How do you Control Moisture in a Building? appeared first on .

Moisture Control System: Applications for the Kitchen

Jarrett Holmes — Thu, 02 Dec 2021 08:31:40 +0000

`A clean kitchen makes for a happy home. However, kitchens are vulnerable to moisture and high humidity, specially where a proper moisture control systems are not installed Those excesses can lead to problems that will not only turn beautiful kitchens into eyesores; they can also cause health problems and bring down the value of your home. Avoid excessive moisture from happening – make sure you are prepped with the facts and preventive know-how in handling these problems.

What Causes Excess Moisture And Humidity?

When humid, warm air gets in contact with cool surfaces, this leads to moisture that condenses and turns into water droplets. Activities like cooking and washing dishes add more moisture into the air. Heating devices, even the gas and kerosene-dependent ones, also lead to higher moisture levels in the kitchen.

A building without a Insulated Metal Panel Systems have typically cold surfaces in doors, walls and windows. Hence, moisture droplets can form on said surfaces and leak into the parts mentioned. This leads to surroundings that are vulnerable to mold, bacteria and mildew growth.

The presence of mold, mildew and bacteria not only leads to unpleasant smells, it can also threaten you and your family’s health. Thankfully there are ways to prevent this. Check out the rest of this piece for the best ideas.

How To Control Moisture In The Kitchen

1. Caulking/weatherstripping Methods

Caulking and weatherstripping are some of the best methods that one can apply to prevent humid and warm air from getting inside the kitchen. These methods also minimize air exchanges that happen and allow moisture to pass through the home.

2. Use Ducted Kitchen Exhaust Hoods

Ducted kitchen exhaust hoods feature vents on the outside; they were designed to take away moisture produced by cooking and washing dishes. Maintain their functionality by cleaning and removing grease, lint, dirt, dust and other foreign matter away from those devices regularly.

3. Use A Dehumidifier

Effectively remove moisture clinging in the air by using a dehumidifier. You can put a whole-house dehumidifier to keep all parts of the house moisture-free or just use them in areas that are prone to high humidity like the kitchen and the bath.

4. Raise The Temperature Of Cool Surfaces

If you have storm windows in the kitchen or bath, make sure to use insulation on those parts. Opening doors between each room builds up circulation – this is a smart move since circulation brings heat to cooler surfaces. You can also accelerate air circulation by relocating furniture from corners of the wall and using fans.

5. Repair Leaks ASAP

Always be mindful of kitchen leaks. Check around the sink and fix seepage immediately to prevent mold and mildew growth. If the basement seems damp, better check if the water flow outside gets directed in your home. Water that keeps entering your home might be solved by waterproofing or general excavation procedures.

6. Know Your Location And Its Seasons

Issues with moisture and humidity differ per location due to the climate. For instance, in the U.S., the South is hot and muggy, the Southwest arid and hot, while the Northeast is frequently damp and cold. These areas may differ in climate but all zones experience issues with moisture and humidity. Thus, when it comes to solving moisture problems, you have to know the climate in your area well so you can apply solutions that will prevent those problems from occurring throughout the year, regardless of the season.

There are moisture issues which may need to hire a professional. If your home requires extensive solutions to curb serious mold and mildew issues or require the rerouting of water flow, it is best that you consult those problems with a professional.

EMAIL US

CALL US

The post Moisture Control System: Applications for the Kitchen appeared first on .

Stop Water from Your Walls and Floors with Moisture Control System

Jarrett Holmes — Thu, 01 Jul 2021 05:24:18 +0000

The process of moisture control is given widespread attention in construction practices. The need to install a secure moisture control system is a must since there is a demand for better insulation and airtight envelope systems that can save energy.

Most new constructions have a higher demand for thermal comfort thus more heating and air conditioning systems are installed. With new construction being done this way, this imposed temperature and vapor pressure gradient can lead to condensation and mold growth. The need to install appropriate moisture control will ensure an energy-efficient system and damage-free building in the long run.

It is a challenging job to protect a residential, commercial, or industrial building from moisture. Moisture control is a very important aspect to keep the integrity of your structures.

In California, Extreme Epoxy Coatings can help protect your property surfaces from these harmful industrial challenges. We apply the best moisture control solution to address the need for impermeable membrane protection for your structures’ walls and floors. We locate the sources of these problems to have a proper assessment and application of solutions.

Importance of Maintaining a Moisture Control System

Relative humidity levels are important when it comes to the comfort and productivity of people working in office buildings. But moisture control system is not only for these structures but are also extremely important in other facilities like:

Pharmaceutical Manufacturing
The integrity of drug manufacturing can be compromised with the presence of just a trace of moisture in the area of production. Trace moisture can be absorbed during drug production and can affect its shelf life. Moreover, coated drugs are dried using a specific relative humidity. Any alterations from the specific requirement will affect the products’ quality.
Paper Manufacturing
Paper has a very specific relative humidity requirement that an increasing percentage from the normal can potentially damage the goods. It can cause irreversible damage once paper starts to expand and curl. Even cardboards are not spared from damage once unwanted moisture has seeped its way to them.
Stacking cardboard will be difficult and unsafe since it is already swelling from the presence of moisture. Printers can also be affected by unwanted moisture and it can present a poor print quality in magazines, banners, and other printed materials.

Understanding the Benefits of Quality Moisture Control Installation

There are a lot of structures that can benefit from having a good and properly installed moisture control system. Residences have the greatest need for this kind of protection since it is the one structure where people permanently dwell. The humidity in a given area can affect its thermal comfort and indoor air quality.

It can affect people’s health especially when damp air is always present. It can facilitate the growth of molds and bacteria that causes respiratory problems and also provides a haven for dust mites to multiply and affect asthmatic people. Aside from this, condensation can form on windows, floors, and ceilings that can potentially damage the building material.

The presence of moisture can practically result in unwanted repair costs and damage. Water molecules that are the source of this malady can be the outcome of poor construction practices done on the property. In most cases, the absence of a low permeable, tear, and puncture-resistant vapor barrier during construction can result in this moisture damage appearing later.

California-based Extreme Epoxy Coatings can help you re-establish control over your property to address and strengthen the areas of concern. Upon inspecting and assessing your area, we can give you recommendations that can prevent further damages.

We use duly tested and high-quality products to ensure your safety. Our product can create an impermeable membrane needed on the surface of your walls and floors that can prevent you from breathing air–filled spores and mildew.

This effective barrier will fortify your protection and increase the integrity of your wall and floor surfaces. We pattern our moisture solution based on the type of protection needed by the property. Our highly skilled technicians will be responsible for its installation to make sure it is done properly thus giving you the peace of mind that you need.

EMAIL US

CALL US

The post Stop Water from Your Walls and Floors with Moisture Control System appeared first on .

The Importance of Moisture Control Systems at Home

Jarrett Holmes — Sat, 01 May 2021 04:45:47 +0000

Water is life. It is absolutely necessary for human health. But not for your home’s structural foundation. Water can damage the physical structure of your home in many ways. This is why the amount of water, in the form of moisture, that enters your home must be controlled. Otherwise, you run the risk of suffering from several health and financial consequences. Moisture control systems at home must be put in place. Why? Read further to find out.

Why is Moisture Control Important for Your Home?

It prevents cracks on wooden structures
The wooden flooring and other fixtures at home will draw in more moisture during summer. This causes the wood to expand and warp. However, when winter comes, the opposite thing happens. This is because you will be using your heater a lot more often during the cold season. In turn, your air will dry out and then draw moisture out from the wooden structures that you have at home. This leads to wood flooring cracks, gaps and loose boards. You may also see cracks in your wooden furniture and other wooden items at home or contact an expert for analyzing floor and wall crack repair.
It prevents mold and mildew growth
Having too much moisture inside your home can make it conducive to mold and mildew growth. This leads indoor air to become polluted and more likely to cause allergens and other indoor pollution-related illnesses. It can also cause damage to your wooden flooring. Unfortunately, if the moisture doesn’t dry out, it creates a breeding ground for bacterial growth. But with moisture control systems at home, the growth of these mold and mildew can be prevented.

It protects the foundation of your home
When water gets absorbed into the ground where your foundation is built, it will lead the soil to swell thus putting pressure on your home’s foundation. The result would be hairline cracks, floods and the deterioration of your home’s foundation. Therefore, moisture has to be controlled before it starts to disrupt and compromise the integrity of your home’s physical structure.

What Should You Do to Control Moisture-Related Problems at Home?

If your home is having these issues then it is high time that you should consider calling the experts who will help you address your home’s moisture-related problems. Call on the professionals at Extreme Industrial Coatings who are known to be the best when it comes to applying effective barriers on walls and floors to avoid moisture from damaging your home.

Extreme Industrial Coatings employ epoxy products that have been proven effective in making your walls and floors highly impermeable. This will not only make the physical structure of your home less prone to damage. But a high-quality epoxy coating can also help you save thousands of dollars since you no longer have to think about repairing and replacing some parts of your home.

What are the Other Benefits of Hiring Moisture Control Experts?

When a moisture control system that is made by experts is in place, you can sleep with much peace of mind that no matter what the weather is, your home will be safe from any damage caused by too much moisture.

Not to mention the fact that when your home possesses an efficient moisture control system, it will also be free from any microbiological activity. This largely spares you from any allergens and diseases brought about by mold and mildew buildup.

A home is where your family’s heart is. Protect your family’s health. Protect your property’s integrity. Don’t let excessive moisture be a part of it. For any signs of cracks or too much moisture, call the experts right away. Call Extreme Epoxy Coatings.

EMAIL US

CALL US

The post The Importance of Moisture Control Systems at Home appeared first on .